Thank Crunchie that tomorrow is Friday and that my reports are pretty much all written. Just some attendance data to add and then yippee…all done. Because I didn’t finish until 21.40 then I thought I would give the painting a miss and as I had the foresight to get the printer going I got a few more crossbowmen and four hand guns…it as is the way of things only 3 came out (along with some shortened swords – again)
As I mentioned yesterday, these fit in quite nicely with the Perry Miniatures… here is one of them beside some of the 14th century chappies…
Now I cannot remember if I added too many extra supports (apart from to the feet) but it would seem that two different people did the supports here…
My foot supports are clearly visible on the right hand miniature. The rest were super thin, but seemed to work ok.
Tonight I was writing more reports so didn’t have a huge amount of time to paint anything. I carried on with the Samurai…
Now to be honest I am going down and dirty with these, I am not bothering about paint splash too much…I will have to fix some missing red and blue though. Next up is to repaint flesh, spears and sashimono white.
I got the crossbowmen cured and onto some bases.
You can really see where the swords failed on the two on the right. Other than that they are really nice miniatures. I stuck them next to some of the Perry Miniatures Hundred Years’ War French crossbowmen and they are about the same size as them.
This evening I had some training and was meant to be writing more reports, but to be honest my head was mush so I printed some crossbows , had dinner and then decided to paint something.
As the Samurai were right in front of me – I started on them…
That is the first ninety six started. Although they are in single coloured armour I am changing hat colours to kind of add in some difference where I can. The pavaises were a nice easy paint… I wish everything was that easy!
Someone shared the following with me… I probably found it a bit too funny!
So here I am in the shed sorting out a print before bed… eight out of the nine printed… ooooh they are very nice 😍
These are straight out of the ISO wash and there are still some tiny supports on them. Unfortunately some of the swords didn’t print properly (along with the missing crossbowman). I want another four or five to make a unit of 12. I will probably pull the swordsman out and do four more crossbows.
Tonight I managed to get some more done on the Arbites, it was another late night getting in, but I did a bit and got them closer to being finished. All white has now hopefully disappeared!
The yellow on the shields still needs some work. I decided on a colour change so used brush on white paint… not the best look. I will add a glaze and see if that helps. I am considering black and yellow stripes on them, but I am still at the ‘hmmmm’ stage about it. It would be striking, but also a total pain in the backside to get right.
Metallic still to go, but definitely looking better now.
Tonight I headed off to visit my mate and we got to drink tea and discuss our upcoming games, both my Alien RPG and the new one I have bought for my eldest…New RPG
I got back quite late but managed to slap a bit of paint about…
Slowly moving towards a finish line. To be honest I decided to just paint the grenades black, with the idea to repaint them white later to allow some red to be added. Really just the hands and weapons to do with the Contrast paint and then onto the metallics.
Hopefully I will get some more done on these tomorrow. I am deliberately leaving the printers switched off as it is getting a bit stressful constantly adding to the painting pile… my plan is finish the Arbites, Flintloque and the undercoated 6mm Samurai (oh and get some basing material onto the 15mm Samurai) then take stock of where I am.
Sadly the undercoated samurai are about a third (maybe a half) of the whole army. I am honestly not sure whether to just get them all done in one go or not…it might be a bit soul destroying, which is why I am dithering.
I have decided to start offloading stuff I am never going to get finished, or in some cases, started! Number one of these are the 15mm Black Hat Aztecs. I got a whole armies worth and decided on the Tin soldier ones instead. I really just couldn’t be hassled with separate shields and hands on something in 15mm, plus everyone had a similar shield, even troops that wouldn’t use that kind. I know that I will never, ever get them done so I might as well get them on Ebay or similar and get a bit of cash to spend on new paint or brushes.
What I am trying to say is my pile of shame is a bit on the large side and needs reducing by at least half, I mean I am sitting on GW blister packs from the 90’s… They are so old that the plastic is actually falling to bits. I will never get round to painting them… I suppose the bottom line is that I need the space, my 6×8 shed is packed, my cupboard in the big shed is packed, the bit in the passage above me books (which are packed in) is stuffed full. It’s a pity I don’t have a van and an easy way to get to some Wargames conventions as I reckon it would be quite cathartic .
Right I am going to stop rambling now and go to bed… I will catch you all tomorrow.
This evening was, in the words of the Rolling Stones, a definite case of paint it black…
I made a start on the boots and upper torso armour, once this is dry I will move onto the arms and belts. I also repainted the white on the Sister Superior. This will end up red for the robes and will remain white for her wimple (or whatever it is called).
Well this is me on the second day after my jab and although I don’t feel crap, I don’t feel 100% either. Because of this I cancelled my game tonight and redid my horses from yesterday…
I had to redo them as a couple had totally gone weird, it probably got too cold and the resin thickened a bit causing problems. Luckily today was red hot…okay it was warm, so as I had got home early due to the head then I set the printer away with nice warm, runny resin. They worked a treat. One advantage of having extra horses is that I can now have a pair for my Brougham…
I will try and get myself on with some painting tomorrow. I have so much to catch up on now, the Arbites being a case in point. I doubt I will get much done tomorrow evening as my mate is coming over for another barbecue and to work on the characters for the Aliens game.
Nope we are not talking golf here, there is in fact a small hole in me, I got my second Covid jab today and as such am a bit headachey, but otherwise I seem fine. I stood next to the freezer and you will be pleased (but probably not surprised) to hear that I had not become magnetic. Yeah there are people out there who for some reason think it will make them.
Anyway I checked the horses from yesterday and sadly one didn’t print, one had half a leg missing, one had a separate leg part and the third was missing the end of the traces. I don’t have a team, but I can probably rustle up a pair.
I reckon the failures on the prints is down to poor support placement, I am not sure why one of them failed totally though!
I am giving them another go in a different orientation to see if that will help, fingers crossed 🤞.
They should be done in about an hour and a half..but I am having an early night so I might find out tomorrow morning if they are done properly… I just had a peep and there seemed to be four things printing.
One thing that is a bit annoying is that I want these miniatures a certain size and am dropping it to 85%. This means that the presupported miniatures are no good for me as the minute you change scale then the easier it is for the supports to fail. I am therefore having to learn support placement as I go along!
My lord if the rings or my caveman miniatures are the ‘correct’ size for me. This means the supports work all the time.
Well as you may have guessed by now I am a bit of a geek and Geeks love Geeky films, Indiana Jones fitting that category. So this evening whilst swearing at the printer I realised the similarity between myself and a character in the film…
I realised that I was a bit like Sturmbannführer Arnold Ernst Toht…okay not the sadistic Nazi torturer part, nor the bit where his face melts…apologies for the spoiler there, but the part where he had only part of the Staff of Rah height and not the reverse.
Tonight I was still having problems… so I decided to level the bed again and in doing so reread read the manual….
Some total pillock forgot to do point 6. To be fair to myself my last printer didn’t have a point six and everything was ready to go at point five…
I am not absolutely sure, but after doing said point six I managed to get this lot off the printer!
I tried these twice yesterday and got a wheel out of it, so here is hoping that I managed to get it sorted. I am printing the carriage roof and luggage just now so I will find out tomorrow. After the roof I have the horses to do and the carriage should be all done.
Today has been a day of frustration, lots of frustration! The bloody printer kept missing out various bits, not sure why but some of the miniatures on the plate did not print, on the up side, I now have a whole load more miniatures, that I was going to do at another time.
The matriarch and the ram were two of the things that I tried to print… annoyingly, when I moved them into the middle they printed fine. Now I am no expert, but this would indicate a levelling problem. I re levelled the bed and still had a failure in the same spots, now it could have been a simple support issue. I will try printing some other bits and pieces tomorrow and see how I get on.
