Tonight I managed to get the 2mm farms just about finished.
This time the buildings are stuck down so there is no going back now. The only problem is, is that there aren’t enough buildings to make the town now…
I tried them out for size on the town base. The town base now has the church/temple on it as the rest are glued elsewhere. Luckily I have another set of thirteen printed and cured. The above still needs trees etc to make it a bit more interesting.
The other thing I managed to get done this evening was to slap some paint on some 28mm Pikemen…
Still a way to go, but they are getting there. Yo be honest a lot of each miniature still to do is armour.
I got a couple of aliens printed successfully last night. I will drop a photo of them tomorrow.
So tonight I eventually got my backside into gear and got some paint onto the 2mm Italian buildings. I don’t think they are going to look too bad to be honest. I was worried that they were going to look too modern, but now that I have seen them painted then I think they will be fine.
The big building will be a temple, the other two buildings will be a mancio or a government building. I have printed off a second set so that I can have lots of buildings… some will be made into a town and others into small farms with attached fields, vineyards and olive groves.
The cavalry ‘patrolling’ the streets give the idea of the size of them. These will need the doors painting, but otherwise they are done and ready to go on bases. I would have got some more done on things but my friend and I were trying to send each other the most annoying songs… I think I beat her.
Tonight I really got down to considering what the bases for the 2mm forces would look like. Now the ‘Age of Hannibal’ has various troop types so it would make sense to base them something like this…
Velites in the front, legionaries next and the soon to be painted Triarii at the back… the problem this makes is how many of these make a legion… to me this would be a cohort, so ten of these, which is quite a few… or I go three of these to make a legion.
It is easier with barbarians as they don’t have set formations or definitive unit sizes… so the Numidian light cavalry above is sitting at 500 men.
I also tried the Romans on the 80×40 base …
Some more Velites in the foreground and the line of Triarii at the back and Voila…a legion. Talking of a legion…
The rest of the evening revolved around getting the extra supports off this lot so that I can start painting them.
I am having a bit of trouble with the Velites falling apart when I take of the supports…this is something I will have to sort out.
Tonight I thoughti would crack on with the elephants. I managed to get them finished and I think they are rather cute…
This is them on an 80×40 base…here’s a different view of them…
If I base them on this size thenI am going to have light infantry in amongst them too. This wil stop the pesky Velites from scaring my pachyderms. These aren’t glued down yet, they are merely placed for effect. I have another eight without the howdah that aren’t in the photo.
Chief Vitalstatistix was somewhat nonplussed to hear that his rival Mykingdomforanorse had got a bigger fort than his, so he popped over to Brittania to see for himself….
My original plan was to use milliput to build the ramparts, but as I had about a litre and a half of my original modelling compound then I thiugh I would try an experiment, building them with that instead.
I increased the height of the original hill in the centre and the started using small amounts to do the ramparts.. you can see the size difference with the original one.
This one will need a bit of work once it is dry as some of the bits justlook stuck on to the base…
My plan is to add some more defences where the opening is… got to confound those Romans somehow.
It looks a bit weird in it’s raw state. Once I have got some paint on it, it may look better. If it doesn’t then it cost pence to make and about 25 minutes in terms of time.
I have decided that this thing is protected by cliffs on the sides nearest the camera. These will be painted accordingly.
I will try and get some miniatures painted tomorrow evening. I might even go for 2mm, 6mm and 28mm…I do also have a 15mm Dervish warrior undercoated too!
This evening I worked on my hill fort interior… Aka making some houses. I spent ages trying to texture my own roof for a simple one I had designed. I really needed something other than Meshmixer. This is able to make the basic shape, but I really couldn’t get it to do any texture on the roof.
So I went back to plan B. I cut out a house from the original village in Meshmixer and repaired it. I the copied a few and supported them. To be fair I should have dropped my support density from 74% but I forgot.
As you can see, I also got some texture onto the thing too… the house is the small grey thing next to the chariot. Chief Vitalstatistix is pleased with the progress. I reckon I will get four or five of the houses in to the space I have.
I will probably do a bigger one than this. I was looking at pictures of hill forts, I never realised that there were so many in England… 1224 to be precise… or more rather 1224 that we have found yet. We have more Brochs on Shetland than there are hill forts in Dorset
I will get the sand covered with watered down PVA tomorrow. Hopefully I will get up early enough to get it done in the morning so that is dry by time I get back
So I am back with the 2mm again. I have done a lot of slicing today. More Celts, Romans and now Hoplites.
In the past I have sliced various things together like celtic chariots and Roman cavalry. This time I have gone for factions… I did eighteen blocks of hoplites, a mix of celtic infantry and cavalry and then a whole host of Roman troops. This should make things easier to organise when I need more of a certain faction.
I also made a start on my small hill fort…
The chieftain Vitalstatistix surveys his home to be. If this works as a proof of concept then I will make a much bigger one.
And finally I got on with some painting…
Now I know the early Romans weren’t in a uniform, it makes painting them a lot easier. Once dry I will pick out other colours for the tunics. Each legion will have different coloured shields.
Well I am back to work tomorrow, I have managed to get a whole load of things done here. Today I put a new socket in, earlier in the week I got the dishwasher plumbed in. So I am heading back to work for a rest.
Hopefully we are gaming here tomorrow evening. So there might not be much painting happening.
Today, as it is officially the last day if my holiday, I decided to just kick back and do nowt, apart fro shopping, being Dad’s taxi etc… but on the whole I had a chilled out day. I started off by working on the Woodsford the 2mm forces. I decided in some dry brushing and went for an army painter green and mustard yellow with a light Iraqi Sand top coat… I think it came out OK…
I then trimmed the chariots and friends off their supports. Surprisingly there was inky kne chariots casualty… the horses pinged one way and the chariot the other…
So from left to right we have the chariots, a whole horde of slingers and some light cavalry with shield. Next to them are some heavy cavalry… these came with the Romans. And behind them two sets of Romans with printed integral bases, which is why they are painted.
I also did a pile more work in the 6mm Italian buildings. These are pretty much finished apart from some touch ups around the window frames – basically when I painted the models I didt do the inside of the windows.
And finally this evening I downloaded more 2mm troops and just had to print the elephants. These come with either armoured armoured unarmoured elephants both with and without a howdah.
I decided to put a couple of grains of basmati rice in front of them just to show how big they are. The other thing is a 6mm ancient village I got ages ago, same time as the Ancient Galleys in fact… I had no use for it then, but now I have an interest again. So I shrank it down to 30% of its original size.
I am going to scratch build my hill fort, but as this one was sitting there I thought why the heck not.
So still to slice and print from the new stuff are some hoplites or similar, some infantry with an oval shield in a more ragged formation and some other infantry with a crescent shield.
Tomorrow I am going to try and get some of the undercoated Romans painted up.
The Blood and Honour Rules that are in the making have huge forces per base, so basically a legion per base. Now I will see how much they cost and to be honest printing the 2mm stuff in pence per printing session so it wouldn’t be too big a jump to have them as well as something else… Next thing to hunt for are some other suitable rules… someone has mentioned Scutarii as a rule set, but at £28.00 a shot then I want to find it what they play like, before jumping in.
I just remembered that I had Warmaster Ancients, and went to look it out…Strangely they don’t have Carthaginians in any of their lists. They do have celts and Numidians, but not Carthage, which as a major power of the Punic wars then you would think they would be there. Talking of books, I have ordered the WRG Punic wars book… https://www.amazon.co.uk/dp/1326256564/ref=pe_27063361_487055811_TE_dp_f1
I had this book years ago when I was gaming in the Newcastle club. Time for a reread I thought… especially as I am going to be wargaming the period again.
Right I am off to ogle at some teeny tiny elephants again…