Posted on by maenoferren22 · 13 Comments

More Tanks… Again….

So today involved some more tanks and giving them a spray of white undercoat so that I can use the airbrush to get some colour on. So I now have six Matilda, three Char B and four Somua (technically I have four and a bit Char B, but I need to print another turret before it is finished).

Things took slightly longer as the Somua in the middle had a bit of an accident. As I was stripping away the support I managed to pull both tracks off as well as the back off the turret. This is probably due to damp getting into the PLA causing it not to stick as well. I just need to find out what colours I have and what colours I need before I can get these painted.

I also ended up listening to this…

I remember doing a lot of Vietnam wargaming, primarily with Esci 20mm plastics and using Bodycount rules.

I then bought some 1/200 scale kit at a convention then kind of went off it again until, funnily enough, joining the Shetland club. I ran an RPG based on an Alpha team in the highlands of Vietnam. We had a hoot. Five players… a four man Alpha team and a Kit Carson scout. As all of my stuff had gone, I went for cardboard troops and flats for vehicles.

I still have the card figures…

Hopefully my good lady will bring the laptop back with her soon so that I can start on some more Germans. The other thing I will need to print are some more roofs for the buildings. Hopefully I have some suitable desert colours for the allies.

Posted on by maenoferren22 · 6 Comments

Tanks…and yet More Tanks

So nothing painted today, but a few more tanks printed…

So here we have six Matilda, three Somua, three Char B, a Honey, a whippet and a very outnumbered MKII. I am part way through printing another Char. I have got some more early British cruiser tanks ready to go, but for that I need the laptop as they are stored on it’s hard drive.

These are destined for Games day next month. I still need to print some more honeys and some more whippets (possibly) then go daft printing more German tanks.

Each tank is taking about an hour and a half to an hour and forty five to print. Not the fastest thing to get on the bed, but to be honest some of the stuff I have printed took ten hours so by comparison these are speedy.

The buildings are already done and have been for months… April to be exact…

https://bogenwaldblog.wordpress.com/2019/04/08/desert-house-5-update/

Evidently way back in March was the last time I printed any tanks.

https://bogenwaldblog.wordpress.com/2019/03/11/printing-tanks-ii/

The rules I will be using are ‘What a Tanker’

I decided on these thanks to Mark in the States who ran some games at various conventions and his local club I think too. He must be very persuasive on his blog as I have Sharp Practice and couldn’t get on with it at all.

I purchased them and liked their simplicity…As Mark pointed out… very easy rules for a participation game.

My plan is to basically print and paint two forces, plus a couple of small villages. One shall be for the Games day and the other is as a give away. Shetland is trying to get our own MRI scanner so my plan is that if people make a donation to the cause then they get a raffle ticket to win the second set. I will have to check all of the ins and outs of this. I was going to contact the guys to see if They would donate another second set of rules to go with the tanks and terrain. I think I have probably run out of time now…

I would have printed out some German tanks, but sadly my good lady had wandered off with the laptop and forgot to bring it back.

So tomorrow, if the laptop returns then I will print out a whole pile more tanks from both sides. I might print out some armoured cars, just fir the hell of it. My favourite being the German 222. Not sure why but it is most certainly my favourite armoured car.

We shall see how many tanks (if any) I get done tomorrow…

Posted on by maenoferren22 · 6 Comments

Panzer II

I managed the panzer 2 earlier. This is different from all of the others in that the tracks are separate to the hull and turret.

I have a couple of problems with this print. Firstly, the tracks don’t match. I seem to have printed a D and an F track! It gets worse…. one is the right track and the other is the left… so all in all a total bugger up! The problem now, is that I can’t change anything without the slicer on the laptop… So my MKII’s will have to wait until repairs are made.

I also printed off a 50% scaled house with stairs. I can now compare like for like.

First up the 60% one…

And now the 50% version…

I reckon I will stick with the 50% versions as to me they look better.

My plan is to print a few and make some hamlets, which can be joined to make a larger village.

And finally another Somua… I was so sad about the MKII

This shows it still with the support in situ…

I will get on with doing a test paint of one of the houses.

Posted on by maenoferren22 · 6 Comments

Aww Isn’t it Cute

I managed to print off the British MKVI

I still have a Panzer MKII to test print as well. I have also managed to find an M3 Grant that I can print. This one is 1/56 scale so will need reducing.

On the 3D printer front: I did purchase the village set from Terrain4Print. $10 for a pile of files is pretty good price. I will test print some of them as soon as I can.

Posted on by maenoferren22 · 5 Comments

Somuaaaaaaaaa

Somua ah ah

Print the tank and drink your tea…..

Somua ah ah print the tank and make coffee…

sorry was listening to Black Lace there….

Anyway tis’ done.

Here he is the little rascal, all printed and ready to go.

I moved positions on the build plate and he worked fine. I did manage to rip the back of the turret off when I was removing the support struts…which was quite a pain in the backside. You can just about see the line. I now have two Char B and the Somua.

I would like some of the little Renault FT tanks if I can find some.

I would have printed up another Somua or a Panzer MKII or even a British MKVI Light tank (or was it a MKIV) but decided to print up a small desert house. It is 2 hours into a 3 hour print. I have also got a two story one but that will take over 5 hours to print.

I managed to get some more paint onto the dwarves…

Still a long way to go but getting there.

I actually haven’t opened the submarine game box all evening. How about that for self control😖

Posted on by maenoferren22 · 7 Comments

Printing Tanks II

So tonight I decided to get the Somua S35 completed.

A nice French Medium tank…

Nice flowing lines etc….

Sadly I returned to this!

To be fair there are some nice flowing lines in there too…it must have popped off the bed the second I left the room. Interestingly enough. I tried again, instant failure. I decided to give another Matilda a go…

Worked fine, I went for another Char B… last time I looked at it an hour in, all systems were go.

The one that failed was front left, the ones that succeeded rear left. It could be that the front left has lost the level or that it is a bit greasy. Either way I will give it a wash and a re level tomorrow.

As can be seen from the photo above the Char B came out spot on! Below is how it came off the plate.

As with some of the other tanks the 37mm gun was a little fragile and snapped off.

So tomorrow we try the Somua again (possibly in a different place 🤔).

Posted on by maenoferren22 · 6 Comments

Printing Tanks

A Matilda to start with….

A picture of how it came off the plate.

You can really see the support network to help it print properly. I have always printed it vertically before (like the turret). This is the first time on the tracks and to be honest, there is less chance of it getting knocked over, the down side is a lot more waste.

Here you can see the stuff that has been pulled away from both bits…weight wise not really very much, it just adds to the time required.

And finally… here she is all trimmed up and ready for a run into the paint shop.

I am printing off a CharB just now with a Somua to follow.

To be honest I don’t know what theatre of operations or date to go for. At the cost of these I can print of a fair few different ones and see what catches my fancy.

I did consider the desert war. The advantages are that I have some palm trees etc as well as some 6mm buildings. I also have a terrain mat and some desert style hills.

I reckon I can print some 15mm buildings and off I go!

Posted on by maenoferren22 · 2 Comments

More 3D Printing

I promise I will stop sometime!

My MKIII and panzer 38t’s

I also printed a water barrel cart.

It has only one wheel as, although I printed two, I hadn’t realised the wheels are stuck together to make a thicker one. It’s a 10 minute job tomorrow so not a worry really. I would have printed an extra pair tonight but I am part way through printing a 15mm Panther.

Pete asked me how much does the printer cost to run, I had heard about the price of a lightbulb, but in reality I honestly don’t know. I tried doing a bit of research, but the internet is so bad tonight, Pages wouldn’t load. One I did manage to see was $370 dollars per year if he ran it 24 hours a day. Others were saying 2 cents per hour. So I think the consensus is pretty much… not that much. Mine has a heated bed normally sitting at 60 degrees, it has 2 fans in the print head and three small electric motors. Plus a fan on the board (similar to a computer fan).

Another site I found worked on an electricity tester and ran a 5 hour print with the total cost of £0.04.

Whatever the actual real cost is2 cents an hour or just under a penny an hour it still is great fun.

My Panther is now half way through…

Posted on by maenoferren22 · 4 Comments

Further 3D Fun

Today was a day if 3D ups and downs…

First the ups…

A nice little Stuart light tank.

I also printed of a Lego clone warrior for my little boy, some eggs for my daughter to paint like real ones. My wife wanted something printed as she was feeling left out.

Then the weirdness started. It wouldn’t print her stuff properly, I checked the bed level and the extruder, eventually I noticed that the nozzle kept getting covered in plastic that kept coming back.

Eventually I dismantled the hot end and found this…

The black stuff between the heat block and the metallic red heat sink should not be there. So this all had to be cleaned off and sorted. I added a new nozzle as the first had probably had it. It had worked itself loose too.

I also changed the Bowden tube, the white thing leading into the heat sink. I also changed the coupler, only to find the tube wouldn’t go through it!

I printed a new bit of an upgrade and am now printing a sarcophagus which I thought was going to be a quick one… I reckon it has another hour or two yet….

I also printed a nice little barrel

Tomorrow I must get back to my graveyard bits and bobs…