Today everything hurt again so sadly no painting this evening. I did manage to slice some stuff to print. I decided to try the Huey on the resin printer… it fit, just! Sadly because I am a pillock I forgot to go to heavy supports so after my 3 hours of printing I had a Huey that was about 3mm high.

I redid it and hollowed it out too. It seems to have worked ok. The back end seems heavy so I am going to drill out the engine exhaust so I can do a drain hole. And to also allow my tiny UV light in there. We really don’t want it cracking open as the resin tries to escape.

I also did the crew and weapons for the PBR…

The guy in the Huey doorway is from the boat, but he works in there too.

We have had a blackbird singing outside of our house for the last few weeks… here he is…

Huzzah, the printer started again in the right spot and we now have things!

I think the Cura supports are a bit crude and didn’t need to be everywhere that they went, but hey I have some things to add to my pile of shame.

The only casualty of these is a bit of a bent 50 cal on the M113 and the flag on the PBR snapped off. The boat still needs things like its radar and rear M60 etc printing. I will probably do these on the resin printer along with the crew.

To be honest of the two the boat is my favourite, the M113 also comes with different weapon options including the 3 inch mortar carrier, this uses a different body for obvious reasons.

Until tomorrow and remember I love the smell of Napalm in the morning!

So I went for the tree supports and I have good news and bad news

So the good news… removal on the whole was easy peasy.

As you can see from the above photo the support on the floor will need a bit of work with a blade. So positives aside, this thing is going to take a long time with sandpaper to get ready for paint…

The above is what the bottom looks like. No doubt I could orientate the model to lessen this effect, but the worry is that it would be more noticeable in the easy to see areas.

I going to be honest I am printing on an old machine (an original ender3) the only upgrade was a metal extruder. I think I got this Christmas 2017 so it has done a fair bit of work. Further to this I generally still print on draft quality. Speeds up the process. I could go to town and print on super fine quality. Fat dragon games has some really good settings but it would take at least twice as long to print. One day I may give it a go.

I think I will start the M113 this evening. Because I am a twit, and there was space on the build plate then I am doing a PBR minus the crew and rear weapons.

Huey, Kilgore and now a PBR… definitely a smell of ‘Apocalypse Now’ going down.

So I got the Huey of the printer and my heart sank… the supports weighed more than the model, never a good sign.

The rotor is meant to be fastened to the drive rod thingy. It snapped off removing the supports. I wish I had made the closed door variant. This was the internal support.

The internal supports filled the whole cabin… bloody nightmare. It took 20 minutes to remove the internal supports.

So I think I need to redo this again and check the supports. Sadly Cura doesn’t show them. I may even hollow it out and do it on the resin one.

So as you can see he is a bit on the big side or the Huey is a bit on the small side.

I will have a play and see what I can come up with.

Today I printed off a few more miniatures from the Nam range. US Forces on the left VC troops on the right.

I decided to see what they would look like and will get them sprayed tomorrow ready for some painting.

The dude sitting at the back is a door gunner for one of the Huey’s. I am going to do the main vehicles on the FDM machine with the fiddly bits done on the resin machine.

I will let you know how I get on.

All together now….https://youtu.be/mQitsOAvEus