Posted on by maenoferren22 · 5 Comments

BUUUUGG!!!

Technically it should be BUUUGGGS…

but I only made one!

This thing is bloody massive. I reckon I need to drop it down to about 25% smaller at least and see how it looks. If you were wondering…the white stuff is baking powder. It causes a reaction with the superglue and sets instantly.

I had some de-lamination problems with the legs especially at the ball joints. Therefore I quasi posed it and then glued everything rigid. I printed the arms on a raft and had no problems with them so that might be the way forward if I do decide to do another one.

The one thing I forgot to mention and that is that this is a poseable bug (well it would be f I hadn’t superglued everything in place). It was designed by JOOXOE31 and again downloaded from Thingiverse.

I didn’t get any painting done this evening because of building this beastie, and various family related shenanigans… (including a stint of Ghost recon with my son. Who hasn’t quite grasped the tactical disadvantage of standing on a roof in full view of his father armed with a sniper rifle.) I also had a go at my hunting game and met the worlds first bullet proof Elk! Tracked him for 4 kilometres before I managed to bag him in the end.

Off playing Vikings in a school tomorrow so not too stressful a day 😁.

Posted on by maenoferren22 · 5 Comments

A Bit of Painting

I threw open my painting box and cracked on with my printed miniatures.

Still a bit to do on some of them but the front two are almost finished. The very pale yellow is going to be a darker yellow. I just wanted to make sure that it would cover ok. I also have a mage in a rather nice purple robe as well as a couple of thieves ready to go. When these ones are done I will get on with the rest of the miniatures for the game.

Sadly as I was working on these my Elves got ignored for another night.

I still can’t get my head around the fact that these all started off as a long string of plastic… a bit of computer magic and voila… miniatures.

I am going to give an arachnid from Starship Troopers a go sometime soon, but for today the printer has stood silent… an unusual thing.

Posted on by maenoferren22 · 4 Comments

3D Printer… Request from a Small Boy

My youngest wanted something printing and this is what he chose…

The printer decided not to bed some things down properly hence the gaps and Greenstuff. It is still a very nice mech. Each part is printed in two halves and then stuck together. This is a ‘House Vermeni Highborn Command Pod’ that came off Thingiverse.

Weirdly enough this was designed by Dutchmogul in 2013. My son picked this one out of all of the options available on Thingiverse. We intend to paint it tomorrow.

In total it took about eight and a half hours to print (including the 70mm base).

I was just looking at it again and it might make a nice proxy of M4A1 Grizzly (heavy suits for the mobile infantry in Starship troopers)…

I really must watch the series and CGI films again. Not to mention actually play my game I bought as well as the RPG!

Today has been a serious lack of motivation day modelling wise. By time I played with the kids, read them story fed the cat (yes evidently I am the only one that can possibly feed him) and the mooched about a bit building the mech it was 10pm and I really couldn’t be bothered to start on any form of painting.

I might try something tomorrow 🤞

Posted on by maenoferren22 · 1 Comment

3D Printing…. A bit of painting.

I decided to start getting some paint onto my miniatures that I have printed.

These are all from Ill Gotten Games. Still a very, very long way to go. I probably would have got further, but I also painted 54 pairs of 10mm elven boots too.

I forgot to show the casualty figures…

These need a bit of work on the top layers. I will have a play around with the slicer settings and see what I can do. The STL files looked fine so it is the slicer that needs the change.

The final bit for this evening are the painted counters…

My initial idea was to paint the numbers a different colour. But as they are very clear anyway I might just save myself a job.

Posted on by maenoferren22 · 2 Comments

3D Printer Mausoleum Finished

Well that’s the roof printed and it looks rather fab…

The one thing that isn’t obvious from this picture is that either the front or back is off the table by about a mm. It can just be seen as a black shadow below the doorway. One corner had raised a bit on the first couple of layers and got stuck back down with some pritt stick. Looks like as the build went on it separated from the base plate again. In the grand scheme of things it doesn’t really matter as it is barely noticeable but in the printer scheme it might mean a sneaky error has crept in. It could be anything from a loose belt to a too hot or cool nozzle. Looks like some more research is on the cards…

The whole thing was designed by Ecaroth and found on Thingiverse. Total print time around 15 hours. 10 plus for the base and 4 hours 11 minutes for the top. The thing is that you set it going, make sure it is going to bed down okay to the build plate then leave it to do its thing. Come back later and voila it is either finished or a nest of spaghetti.

I am hoping to get this and the other one painted up this weekend. I have a long weekend so four days of work… huzzah!

Posted on by maenoferren22 · 4 Comments

3D Printer another Mausoleum

Yep I decided to print another Mausoleum, this time from a designer called Ecaroth. This took a whopping 10 hours 45 minutes, with an expected 3 hours 45 minutes for the roof. This is the ruined version, there is also an intact version of the same tomb.

I also downloaded some civilian ‘casualties’ from Ill gotten Games.

These are two of the upright civilians, the rest are having a bit of a lie down. They are still on the print bed. Now these all come without bases, so I decided to have another go at producing a base to attach the mini to. This is another great set. They only came out yesterday I think.

These are both on 30mm bases that I made in 3D builder and then merged the. miniature with the base. I made them 3mm thick, but may shave it down a bit.

Interestingly enough there were no whispers on these, all though I did do them individually. The wounded or dead ones were all printed together. I didn’t notice too much stringing before I left them.

I will find out tomorrow. As I was feeling a bit knackered I decided that a very early night was required. This means no elf painting….

Posted on by maenoferren22 · 4 Comments

3D Printer… More Miniatures

Yup I downloaded More minis today 😱…I am beginning to think I am developing a problem.

The next three town guards try to work out what to do with the goblin. The other two are a big oaf and a porter. I managed to snap the porter off at the ankles and then dropped the other one and the top of his head sheared off! I think I might have to increase the infill a bit or at least change the structure.

In case you were wondering, this is how the guards came off the printer…

I put them on a raft to make sure they stuck. They also had a lot of whispery material between them, you can probably just about see it on the heads.

It kind of looks like this (apologies for the naff photo)…

It is some form of extrusion issue. I am trying to work out whether it is too much or two little going through the nozzle. I do know that it is a right bugger to clean up properly.

The four above are 4 Alternative hero miniatures for the printable game I am working on now. You can really see the issues with the strands on these and to be honest this is the worst I have seen.

Once again all Of these are from Ill Gotten Games.

I also managed to spray all of the tokens tonight. Note to self … wear a mask when spraying lots! I found 4 different coloured sprays to make them different.

Posted on by maenoferren22 · 2 Comments

3D Printer… eclectic mix

The title says it all really…

A couple of Sci Fi crates, one with a couple of heavy stub pistols and the other with some kind of combat shotgun.

The three guys are town guards from Ill Gotten Games. Two of them have halberds and the other has a crossbow. The guards were printed with a raft in case they needed it. Sadly it stuck too well to the plate and it has taken me about 45 minutes to get it off.

I set the thing off to print a big air vent and of course now the bed doesn’t seem to be level. I am too tired now to faff on with it tonight. I will level it properly tomorrow. I just hope that the plate hasn’t lost any of it’s adhesion properties.

As the guards were covered in fine wisps of filament it might mean there is a problem developing. I will have to have a proper look tomorrow.

Posted on by maenoferren22 · 5 Comments

Tauriel a Wood Elf from Mirkwood

My daughter’s character is now finished.

I am rather pleased with it and she is really pleased with it.

It has come a long way from the bare white plastic… I spent quite a while on this one, probably longer than I would have with one of my own.

Tomorrow the party have to try and rescue an idiot youth from a wily old troll. This task is made all the more difficult due to the fact that two of them are hobbits!

Posted on by maenoferren22 · 6 Comments

Wood Elf

My daughter has joined our gaming group and is playing a wood elf character in our One Ring campaign. Being a kind father that I am I purchased a miniature for her and am now painting it.

Still a very long way to go, but I am getting there slowly.

We did have a lot of fun on Hero Forge making up characters but at $10 for the download and $20 for a physical version we went for the cheaper option of £3.25 for a reaper bones mini.