Tonight Joe and I had another game of Firefly…
It was a close run thing. He was nearly Skint, but managed to pop a victory on the last turn.
The Reavers made two moves in the whole game and the Alliance Cruiser the same.
His is a better game at the club as we ca spread stuff out on the table rather than having to squeeze everything onto my kitchen table. We are going to give Frostgrave a bash next week.
Well, you might remember I did some 6mm Italian wars using a mix of metal and 3D printed. I actually haven’t touched them since….I also did 28mm quasi historical Imperials…Found here but never mind I got a message from a guy who I supported on Kickstarter to say that he was going again, this time with 10 and 15mm Anglo-Scottish humans and Turko-Mongol humans.
He very kindly sent me a couple of command bases from the original 10mm ranges . Spanish on the left Imperials on the right…
Now I do like his stuff and I am very tempted. £14 for an àrmy and £9 add on if I fancy one of the earlier ones.
Watch this space
So this post is for Faust. The one painted is the original 28mm ogre, the unpainted is shrunk to fit my 15mm imperials.
There isn’t actually much of a difference, the roughness seen on the undercoated one is from the rattle can undercoat.
Fear not, this is not an order, but more a description of my latest prints.
The four in the centre were done overnight. I put them on my 2 foot square terrain mat. So as you can see they are not tiny things. I am printing a second set off as I don’t I will have enough filament on the spool to do anything bigger. Over the next few days my plan is to do a lot more scatter style pieces to use up the remains of the roll.I
I will see what is in this range and then look at my stuff from Lovecraft or Highland Miniatures. Some scaling will have to be done with the Lovecraft miniatures as they are massive compared the these.
Yes the printer was busy again last night…
The only problems I have is that I printed this and for some reason didn’t slice the bottom part. I also cannot remember if I dropped the size down a bit. Therefore I have redone it and the lower portion at 90% size.
This will act as a stand alone ruin in its own right.
After purchasing various bits for the FDM printer I found two things, one – my motherboard won’t accept them and two – I got it working again!
So with a bit of swearing and faffing with the build plate on the fly I have managed to get some buildings printed. Now the centre one really needs redoing as it has printed badly. The columns at the front are really fragile.
I also had a power outage and somehow the printer actually got back on with it accurately (it is meant to, but sometimes what is meant is not what happens!) The one on the right is the affe Ted one here.
So here are the three new ones…
These are all from the Printing Goes Ever On. The one on the left is from an earlier download, the other two are from the ‘not’ Osgiliath set.
This photo shows my 20% infil. It was taken when he power came back on…
The right hand model has a first floor that comes off and was printed separately.
I am renting another one off right now. Four hours in… and I cannot really see the timeline moving… the FDM takes forever. The building on the right took 32 hours plus another 5+ for the separate floor.
In case you are wondering, the printer is sitting on a concrete paving slab. This is because I have to leave it on for so long.
So I was bored and decided to get the base on the cart sorted rather than leaving it… so here it is in its almost finished stage…
Really just the zombies and ravens to add to it.
So I was perusing YouTube and came across this video
Army Painter Development team or something like that.
Three of the four YouTube channels I watch regularly and all got sent AP speedpaints and of the three not one of them mentioned reactivation. I am in no way saying it was a set up, lots of other people got sent the paints too. I just find it interesting to see where this goes…
its fine though Vallejo are bringing out their Xpress range in November and they Don’t reactivate.
Since my initial problems with reactivation I have probably used my AP Speedpaints three times, only using the odd colour and now that I have a nice purple in my Dipping inks and I can get one in Contrast too then I think they will remain on their shelf.
So I eventually got around to getting a base started on the corpse cart…
I have got a couple of crows and a zombie to add to it as well as the completed skeleton signpost.
So as you can see I still need to add flock and tufts, but it is getting there.
So I got the skeletons with swords onto my few remaining round bases… well actually I had to take some minis off four bases to make the full twelve. I could have used 2p’s but was concerned that the weight of the coin might cause damage to the swords etc.
I also got the cavalry printed too… upon saying that. When I got them off their supports I realised that there were only five troops and six horses. There is a seventh horse. I am seeing if the female vampire from the Zombie dragon will fit on it.
I got a bit more done on the corpse cart too.
Bogenwald 