One Thin Coat

Nothing at all to do with a well known paint maker. Most of my painting now is one thin coat using either Contrast, Speedpaint or Xpress paint, or a mixture of all three.

This evening whilst on puppy duty I decided to have an easy win so i decided to get these done.

Well the industrial drums that is. The other is pretty much done. So after a bit off a head scratch I really felt that Red would cause me some problems with the rust later on, a bit like here:

My original concept idea was that different containers would be colour coded, but after that initial idea i changed my mind, sadly after doing the above with a dry brush if red. I then remembered that the original industrial piece was yellow so that decided it. All would be yellow. 

I was concerned that the red underpainting was a mistake, but in the words of my favourite artist… “there are no mistakes, only happy little accidents.”

The red, with the white over it has really enhanced the look I was wanting. It has given a mottled, grungy look thar makes me think of old metal that isn’t going to hold the contents inside for much longer.

My happy little accident has really helped. They look even better now that the paint has dried.

On one of them I have missed covering a bit of red and that in itself looks like there is a bit of a leak forming. In other places it actually looks a bit rust like.

The original title for this post was going to be ‘Two Thin Coats’ a bit click batey I know, but in fact one thin coat will evidently do the trick.

Alien Isolation- spoilers

Well, as I suspected, the xenomorph that I managed to drop into the gas giant wasn’t the only one. I always wondered how I could leave it behind at a transit station, only to find it dropping out of a vent on the other side. I was convinced after finding a couple of people with holes where their chests should be.

I have just interfaced with the main frame to find that a) W.Y. have a directive in place to preserve any specimen  and b) I am expendable. I am not being paranoid… it says so in the directive. The Working Joe’s have turned hostile as they are now following said directive too.  I am now on the hunt for a hive. I couldnt put it better thsn Frost who so eloquently stated… “What are the hell we supposed to use man – harsh language? Yes when I arrived at the Mainframe I had to relinquish all of my weapons. Thankfully the jury rigged stuff I made didn’t count.

As I said in an earlier post, this game has really got me thinking about running an RPG set on the station. The beauty of it is, I have a full cast of characters as well as maps and other exciting things like that.

Ready for Undercoating

So this evening I felt inspired enough to hunt our some bases and get nine of the eleven stuck onto them.

The spare two were front left. As I have a bit of a Tyranid force then I thought it only fitting that they have some helpers. These are the Code Splicer cult. They remind of something else with a similar name 🤔.

Behind them is the pair of ‘slave ogres’. Front right are a pair of skull server things. One with a gun and one with a medical saw and syringe.

Behind them are a trio of police officers with a spare head of an Erroish warrior as a proxy. Some twit dropped the original somewhere and it cannot be found. I felt the gas mask worked with the other pair.

And finally at the back we have a cyborg bounty hunter which frankly looked so cool that I had to print it.

Somewhere I have this lot that I want to paint and can I find them?

We are taking my school on a mini residential tomorrow so I might have random bollards to write tomorrow evening. Part of me fancies taking something to paint tomorrow evening, but I doubt I would get the chance.

I Might Have a Problem

Well if you have been following my blog for a while then you will know I do like my 3D printer and therein lies the problem.

The other night I was doing a test print of something at 75%. One thing on the build plate, one teeny tiny thing. Seemed a waste to turn it on for just one thing… so I spent the next hour deciding on what to add to the plate…

I actually have zero need for a pair of ogres with big guns! Ooh actually I have just thought of a potential use… proxy Super Mutants for my Fallout RPG if it ever gets off the ground.

On the left there is a cult psyker for some Alien infestation type force  and on the right is a cyborg bounty hunter.

To be honest it is just too easy to find the file and print it. I reckon I am going to have to go back to the paint what I have approach.

I also printed off a band for each of the Geek Club…

They are a bit smaller than what they are used to, but we can see how they cope.

Back with the FDM

Well I picked up some filament in a charity shop really cheaply, I wish I had got the other three rolls, but didn’t. By time I got back they had gone.

Sadly they weren’t in grey, I hot the most staid of them with green.

Here is my first print with it

It’s just shy of 7 inches tall and printed  in four or five bits. I cannot actually remember.

Printer Overdrive

Well I have gone a bit bonkers printing things. I am certainly running through my resin backlog.

I eventually managed to print the large chemical mixer thing…

I also did the walkways and a leaky drain.

The  drum above is the second attempt… the following shows us boys and girls why we need to ensure that we fasten the build plate properly!

The following are a couple of pipes. They were part of four things on the plate. The chemical barrel pallets both failed, which led to a lot of swearing. The vat was full so it took a few shenanigans to get the cured lumps of the FEP.

Chemical Plant II

This evening I sorted out the new chemical tank. This one is a little more complex than the other one. It has screens and buttons etc, but it is still going to work well.

I have sprayed it black ready for the white dry brush tomorrow.

I am printing a second one right now. My plan is to have at lest two joined by a walkway. Three would be better but I am not sure if I can be bothered to paint three.

Rust Bucket

Well this evening I added the rust to the industrial terrain piece.

I really tried to get the rust where it would get rusty.

The sign is one of the ones I printed last week.

Hopefully I will actually achieve more tomorrow.

A More Productive Evening

This evening I didn’t turn on the console and decided to be a bit more productive. First off I tried colouring the rust on the vehicle…bad idea. I therefore redid it with the rust effect.

It looks better now than it did so I am either going to leave it as as, or get some chalk pastels and add them to it… what do you reckon?

I also built another container… on this one I have a door that can be open or closed.

I think I will go for one more after the one that is in the post printing process.

Print Minis has a pile of containers that have either shops or habitation inserts. I reckon some of those will be next.

A Busy Evening (sort of)

This evening we had a power cut for a good old while so it tool me a while to get motivated.

First off I started building some shipping containers. I would have had two completed. Sadly the power failure caused the second one to be unfinished. I am having to reprint the bits again.

I also had a faff about with some netting to add some camouflage to the scout sniper.

This is just wrapped around the miniature to see what I think which is why bits of the net are sitting at 90 degrees to the weapon.

I also got some rust on the vehicle… not that you can see it.

Now I am not sure if it is because the base colour is red, or if the rust effect stuff has gone a bit odd. I will try another layer tomorrow.