A Bit on the Wobbly Side

I have sat for about 45 minutes trying to get the energy to get off my backside. I am hoping that I am not coming down with the thing the rest of the family has got.

For this reason I am having an early night. I am going to head off now and check how the second ram is doing on the printer, but the first one came off perfectly. Here they are…one and two. I thought I would show you the auto supports for the miniature. I tend to do an auto support then add more as necessary. In this case I think I forgot to change to light supports before slicing.

I need six in total for a cavalry unit in Dragon Rampant. These are just the same model reprinted. I will slice some more. They come with a lance, sword and mace as well as having four different bodies. A separate ram is available too. This means I could have mounted infantry. Come to think of it there might be an unarmoured ram too. I honestly cannot remember.

I am printing off another three two handed pole arms. Once these are done then I will count up what I have in terms of bodies and arms and print more arms as necessary.

Today I Went against tradition and actually bought some GW undercoat. I got lead belcher as I thought that I had a lot of armoured models to paint up. I will spray them metal and then paint the cloth and flesh white so that I can use the Contrast paint. I might totally regret this! So I will do one unit and see how I get on with it.

Two more days to go before the summer holidays. We had sports day (indoors) today and are having a leavers presentation tomorrow. Typically it is going to rain tomorrow so we might not be able to let the parents attend. I was doing it outside to allow them to see it… bloody weather has put paid to that.

My new teacher is coming for a visit tomorrow to meet the kids so that is something to look forward to.

A Metal(ish) Helmet

Today I managed to find some Rustoleum Gun metal spray paint. O thought I would give the old helmet a once over… probably should have tried it on some scraps first…

Now this thing is my test piece so perhaps this is the scraps but it is now a sort of metallic colour. I will give it another once over tomorrow.

One of the interesting things I found was the nose guard bent, you can probably just see the line across it. This shows me that I need some kind of support in behind it… this is definitely a learning curve. I think over the next few days then I will try another one using my trusty, rusty scroll saw…

At least using this then the cuts should be vertical and not need filling as much. I am not certain but I think I bought this before we moved to Shetland in 2006… now to be fair I might have brought it back from an Aldi sometime after that, but I cannot remember doing so. There again, my good lady spoke about the gerbils we had when my eldest was small.. I have absolutely no knowledge of any gerbils in this house whatsoever

I will carry on fiddling with this aspect of a hobby as I do really enjoy it. on the next helmet I am going to try simple decorations too… plus someone very kindly shared a place where I can get faux horsehair crests (well I actually have a genuine horse hair crest, but it is for my Corinthian helmet 😉).

Now if we get back to the helmet above, I am going to have to work out how to ‘hide the messy bits. In hindsight some simple decorative features would have done the trick, but as we know hindsight is a great thing. I could actually just sand off the paint and add some embellishments…I will let you know what I come up with.

A cap of iron and leather would have been the easiest to achieve. I have some 2mm foam that would work for the metal part. The rest would be done like the bracer… big thinks, being thunk!

A tower of Strength?

Or perhaps just the Crow Tower from the Frost Kickstarter by Iain Lovecraft…

So as you can tell, I did shrink it down a bit, it will work well for both 6mm and 10mm Armies, but sadly not the 15’s. Tonight was mostly spent adding spots of different browns and greys.

This was done on the Ender 3. The original size has useable rooms and in fact this has a desk, chairs ladders etc on each floor.

Not sure what I am going to get on with tomorrow evening, probably getting the Astartes undercoated, not to mention find them some bases.

Sorting out the Resin

Tonight, I really couldn’t be bothered to do anything. So I went through my pile of prints to sort out what was worth keeping and what wasn’t.

I also managed to get some black onto the 40K base edges…

The hand holding the bow (from another set) took a bit of trimming, but it does give me a different missile weapon to the crossbow. I will have to get Mordheim out to see what things cost points wise.

I am printing the lion knight and some more militia bodies just now, but then I really do think I need to do something with them painting wise.

Talking of printing I realised that the ISO was getting pretty skanky so I decided to decant the two litres of it into my big jars and let it settle and pour off the cleaner stuff. But I, in my infinite wisdom, put it outside to avoid the smell… cleverly I forgot and came home this evening to something akin to Greek Yoghurt… Whoops!

Tomorrow I will try and print some bases for the models I have. I have an STL for cobblestones so that will do for my miniatures.

And Finally, I probably laughed far too much at this…


Painting Success

So yesterday, I said that today I was going to paint something, in fact anything… well I kept to my word and actually did a fair bit. First off I sprayed various things…

Now there were some spaying annoyances to deal with, first off my grey primer turned out to be an etch primer… luckily I realised as it had a different nozzle. I gave it a try on the small ‘goat shed’ to see if it would work. Luckily I had other cans of the basic grey so the rest got done in that. Then I moved on to spaying things white. I warmed up the can, I shook the blazes out of it and it came out like a watered down version. If you look at the right hand photo above you can see what I mean on the green and orange miniatures. It eventually came good on the grey. Now it might just be a bad batch or the coloured plastic needed going over with a different colour first. I sprayed the top of the mini tower white and it seemed to work fine. I will have another play with things tomorrow.

I also managed to get these three just about finished…

I need to sort out the bases, but apart from that they are done. I really enjoyed painting them to be honest.

I also got a bit more done on the Genestealer cultists as well as some other bits and bobs, mainly the original scouts…

I also got the hole in the roof finished too, so hopefully the leak of leakyness has buggered off, only time and heavy rain will tell.

Tomorrow I have the tyres to change on the car, but I am also hoping to get a start on the lighting and then ceiling insulation.

Building, Printing and Painting

Cor blimey, I have been busy today, shopping, building, sawing, Printing, Painting and making dinner to name but a few.

Well as you know I do like my 6mm Samurai and 3DAlien World’s has produced a very nice temple building. It came out today so I just had to get it. In 28mm it would be huge, in fact the Ender would only take one base bit at a time, luckily I was going 6mm. So I built bits in 3D Builder first and then reduced them down to 24% the base is printing right now, but the walls came off really nicely…

Unfortunately I don’t think I am going to be able to pre build the roof, but I will most definitely give it a go.

I also got the Trewell Common buildings finished too..

Now you may notice that the photo was taken on a different surface… this is because I now have a dedicated painting place I; the lounge…

This pretty much can store most of my paints miniatures and other bits and pieces. I tried it out this evening and did some more on the Cultists…

I also did some work on the conservatory. We are putting down decking as a different kind of flooring and to cut a long story short…short being quite appropriate here….

I swore….lots!

80cm short! It comes in 4.8m lengths… hopefully there will be a knackered piece that I can get cheap… wish me luck!

Printing Cock-Ups

My FDM has now been running for 26 hours straight and is making a rather lovely small cottage… there is however a bit of a problem, this one seems to be a bit on the large side, especially for a small cottage.

Considering that the build plate itself is 22cm square then you will see what I mean. I am just going to let it run its course and then shove some figures near to it and see what they look like. To be honest I can’t remember adding a raft or the tree supports, so I am now wondering if I had somehow clicked a button to increase the size.

My other balls up was my goblin Warg rider and Warg…

Now the more observationally astute will notice… a) the lack of any goblins, or Wargs for that matter and also b) its a 2 legged moose… evidently I pressed the wrong button last night on the resin printer too…

So as I was faffing on for so long, the prints have eventually finished, the FDM printer taking 27 hours plus to finish, and it is indeed bloody huge….

On the up side, the goblin and Wargs printed properly this time…

Diorama Idea number 2

Finally… when I was hunting through a box Then I came across some of my earliest ever painted miniatures and I thought it was time for their 25 (or more) year update. So they are going to get stripped and redone in a new paint scheme… let’s see how I have progressed…

Madame Rides off into the Sunset

Well I got a bit of time today so I managed to get her to the almost finished stage. There are a couple of white bits that need sorting but that is about it.

I will get the grass attached to the horse hoof painted and then also add some tufts too.

Also managed to get my Nobori finished too…

As well as sorting out some more on the knight’s mount and the nids…

So I buggered my ribs again and have promised the family if they still hurt tomorrow that I will go and get them checked in A&E. Some pillock left the car lights on yesterday and foolishly tried to push it to allow for a downhill start…problem was I had to push it up hill in the car park first!

I will get my first Covid Jab on Monday morning. Looks like things are heading in the right direction. I am already doing a test twice a week so I know I don’t have the Lurgy (well I didn’t on Thursday).

Madame is Getting There

Well it has been slow on the painting front of late, but tonight I worked on various bits and pieces and managed to get paint on a few things.

The main thing I worked on was Madame…

There is still the glaze to go over the yellow. I managed to pretty much hide the big gap, there is now a dip, but it could be a joint in the cloth.

I also got some work done on the cultists as well as the gold design on the other side of the knight’s horse.

I got the kids to watch Galaxy Quest with me this evening, they really enjoyed it. So did I, it had popped up on Netflix and as such I decided to watch it myself yesterday. I enjoyed it so much that I watched it again tonight. Hopefully I will manage to get some more bits and pieces done with the painting. I need some progress as I have a Patreon and two Kickstarter worth of printable miniatures and terrain to land in the next couple of weeks.

Back with the Yellow

Tonight I did some highlighting on the yellow. I also managed to get some gold onto the standard bearer too…

Really, really miffed that I missed the bloody crack on the yellow neck. I am not sure what to do to get rid of it.

Once this is dry I will get a glaze on the yellow and a wash on gold detail on the blue.

I will also work on the red alien in the background. I must also get back into the Genestealer cult. I reckon the annoyance of the yellow put me off painting things for a while. I honestly couldn’t face them.

Hopefully I will crack on with things this weekend.

On the upside, things are getting lighter here now, there was still a bit of light sky in the West at 19.00 this evening. It will soon be daylight 23 hours a day.