Legionary Troops

Tonight I tried painting the Roman side of the equation. They painted up absolutely fine, but when I was painting them I noticed that they, for some reason, had a whole more supports. These proved problematic in getting them apart. I also noticed that the horses seemed to be missing some legs. As these are new to me it will take a while to get things right. It is basically 6ml of resin and 45 minutes of time.

As you can see the units are really broken up. I will try again tomorrow and see what I can do. They work better without a base. I have ordered some flexible resin to mix in with my normal stuff. It should help a bit.

Back with the Samurai

Tonight I decided to get my finger out and do some more on the 6mm Samurai. For these actual Samurai I decided to do them lots of different colours from yellow through to black…

We went out today and found some of the lesser spotted Shetland Wallabies and a Shetland Emu…

I also got a couple more untis of the 28mm Renaissance undercoatedtoo. I went for some flagellants and some more pikes.

And finally I have printed a hundred strips of Arqubusiers for Joe and I… incidently we are having another game on Monday afternoon… huzzah!

Pike, Shot and a Printer Revelation

This evening I managed to get the base ready onto the pikes and other 28mm Renaissance miniatures.

I also printed off forty arqubusiers, and it was then that my epiphany arrived. If you recall, a week ago I suddenly had an issue printing 6mm miniatures. Today I think I know why… It seems to be the supports, and the way they work. The bases were too close together so they formed a solid and more importantly large base.

I printed an earlier set of models that I had had partial success with and when I went back to check part of the base was hanging off the plate… suction on a large area can cause problems with the print sticking to the FEP instead of the plate…

The sticks are the remains of the supports. There is a definite bend in the back bit and you can really see in the foreground where there are ghosts of miniatures. This bit was sitting at about 45 degrees to the build plate. So I went back onto the computer and, as the pikes worked without support, I just went for it… absolutely no problem at all. Forty arqubusiers came out absolutely fine.

So lesson learned… supports on 6mm miniatures are a bit of a no, no.

Glueing, Undercoating and Army lists…

Today has been hectic to say the least, I didn’t sleep well last night and wanted a lie in, only to find second kitten had been caught so we went over and picked it up… here are the little cuties…

No names yet, number two is on the right.

We then sorted out the shed some more. The knackered, bounced upon sofa, is going in there for some seating. I managed to sort out the prolapsed base as well as add in some more padding to the front, the new one was built in the lounge too.

In amongst this busyness I managed to get the Baccus Samurai undercoated. I also got the cavalry based up too…

The four in the front are messengers with their big Horo on their back. On the far side are some mounted commanders. I am going to add in some printed banners to the base.

The other thing I have been doing is working out a sort of army list for the Italian wars. I have ordered the Furioso supplement as it deals with this war and adds solo play… I did find an army in my 6mm ‘yet to do something with’ box…

These are a mix of Irregular miniatures. I bought them second hand about 20 years ago at least. The two big flags in the foreground are from the fantasy range as they have five figures in the strip… historical’s have six.

Still in two minds on 6mm or 10mm, but I have plenty of time to choose as the Samurai need finishing first.

Caravan Samurai

Yesterday and today I got on with basing some of the 6mm samurai, well actually the ashigaru (both yumi and teppo). My original plan was to plonk eight miniatures per base, however they wouldn’t really fit on the 20 x 40mm bases so in the end I glued only four on each.

Above we have the teppo armed ashigaru. I have the same number armed with the yumi. So 48 bases in total.

With the same four to a base then there will be the same number of Yari armed ashigaru.

Now interestingly enough I don’t seem to have any samurai infantry. If you remember a while a go I said I seemed to be missing some cavalry . I have rechecked and there aren’t any missing. It looks like both were in the same bag. Each one is meant to have 18 minis in and I have 36… I cannot find the three packs of foot samurai, that should be there.

Now as you know, I love my 3D printer, so I was quite excited to see these…https://projectwargaming.com/collections/samurai

Lots to choose from 😉.

We had another good day today, it rained a bit so we played plenty of games. We gave Munchin Quest a go… first two monsters were a level sixteen and eighteen. Luckily for us they ignore low level Munchkins!

Samurai Cavalry Done

Well I think that they are done, or at least as done as I am going to do them,with the exception of the spear points.

The Irregular ones in the background are still to finish off. I still have a whole more Baccus infantry to get started, but the army is definitely on the way to completion.

I managed to get the caravan moving again today, new springs, plenty of WD40 and a neighbour with pair of pliers and voila the brakes now work. They will need a new cable but at least I can now tow it to someone if I cannot manage it myself.

Birthday Treats, Printers and Painting

Well I have had a jolly old birthday. Got lots of brilliant presents from the kids. I also got some great maps for RPG’s from my mate. My main present is still in the post. As the old iPad has eventually given up the ghost then I decided to go for a new Android tablet as they are a whole lot cheaper.

Pressies from the kids

I had a lazy old day, eventually got the springs off the brake shoes too. I did manage to take time to flock the duellists bases…

And get another building printed…

The one on the right is from last night.

I am having to get used to slowwww print times… I went back in to check after leaving it for an hour and fifteen minutes (after the usual making sure the base layer was down)… it had got to here…

Luckily it is going over night! This new one is a two level one, hence the two separate bits.

I am also using up the resin in the vat by printing a wagon with a pair of horses. This was to take about three hours, if I can be bothered I will go and check on it in a tick.

Tomorrow I will do some more ruined buildings. They won’t be done in a hurry that’s for sure. The FDM is slow but it is a whole lot cheaper than doing things on the resin printer (if they would fit that it). I might actually do some for my 6mm Armies.

Duellists, Crossbows and a Cavalry Command

Today I actually managed to get the duellists just about finished. Still a bit of tidying up to do and bases to cover, but on the whole I am happy with them. Are the uniforms accurate to Flintloque cannon… nope not at all, well apart from the boots that is!…

I cracked on with the Cavalry command and the mounted crossbows…

Interestingly enough (and I just found this out) by the time of the Italian (Renaissance ) Wars the mounted crossbows would supposedly shoot from the saddle. Now this is something that is intriguing and I will have to look into it a bit more as it causes a lot of questions, first being how the heck do you recock the thing when you have shot your bolt? Secondly how do you stop the bolt just dropping off?

I think that is it for the miniature printing for a good old while… I pretty much have two Armies now or an army and an allied contingent. Upon saying this I want to just check on the Dwarves as they could do with a unit of light or medium infantry, plus there is the matter of the light cavalry and a giant.

it is handy having a South facing conservatory with a wide widow sill…

So instead of printing more miniatures then I decided to go for some terrain on the old filament printer. It had sat for a good while and the filament had snapped at the extruder. Luckily I managed to slot a new roll in.I took some of Iain Lovecraft’s ruins and shrank them down to 70% and set the printer away. I relevelled it a couple of times and still came back to this…

This is about the size of a cherry tomato. I was a bit miffed as it was an hour and a half into it when I went back. I set it away again, but sat with it whilst it printed the first couple of layers, this meant I could alter on the fly. It still tried stripping away at one end, so I am afraid I got the superglue out and stuck it down. Not clever I know but it was what was handy. After about 2 hours it was still delaminating so I shoved bluetack up against both sides of the bit that was threatening to cause the whole thing to come away. Hopefully it will be okay by time I go back tomorrow morning. The one thing I am not used to now is ten hour prints for a short run.

Cavalry, Hounds and some Religious Zealots

The first of my heavy cavalry came off the plate today, four are finished and two are still printing. I am doing six of these heavy cavalry…

Now with these I went for the smaller of the banners, part of me now wished that I had gone for the bigger one. In the second and third set I have printed a ‘warhound’ these came from Iain Lovecraft’s Frost civilians and are actually the rat catcher’s dog. As they had a spiked collar I thought the looked cool. I kept them at full size instead of dropping them to 75% like the rest. I reckoned they would make a passable mastiff/Great Dane type of hound.

I also got the hands glued onto the Flagellants… one is missing a left hand.. sadly I think it fell off the supports and was lost in the shed…

The top three on the right are the ‘command’ set… now these will make nice cultists as well as religious nutters. I also managed to get a photo of the Zweihanders…

And finally… I actually managed to get some paint onto the duellists…

I am pleased with how they have started, but less pleased with wood Elf. This is going to need another undercoat as the Gesso has left it shiny and the paint won’t adhere to it properly. My guess is that I really didn’t shake it enough to get the paint and medium mixed together. I did thin it down a bit with medium, but by all accounts that is what I am meant to do. Probably find I purchased the shiny version!

A Bit of Painting and New Toys

Yes to Post man (or Lady in this case) brought lots of goodies today.

I thought I needed some form of simple reference material and in fact I found out a load of stuff I hadn’t known before… I read it over breakfast 😂. I also got some new toys…

As I had bought Duel a good while ago I thought I might as well get some duellists too. As I was getting bases from Alternative Armies then I thought I might as well… I also got a pack of freebies… armed brains… yes you did in fact read that right… a pack of floating plains with lasers and stuff coming out of them… very weird.

Now I also got a bit of painting done…

I was mainly painting the undercoat for all of the decoration on the command horses. I also threw some paint on the reins too – I am not sure why as if someone is on a horse and they appear the size of a 6mm miniature then I won’t be able to see the reins, let alone tell what colour they are. The other thing was to get another layer of Gesso on the elf and horse. I was inspired to give one a go as the mounted archers haven’t been finished since I got them. I will see how I get in compared to the originals.